Africa-wide supply enquiries · Delivery throughout South Africa

Supply SA — Your One Stop PPE Wholesaler

Supply SA buying guides

Nitrile glove quantities: converting boxes into a usable order

Published 19 November 2026 · Team procurement in South Africa

A glove order can be wrong by a large factor even when every size is recorded correctly. The common cause is a mismatch between individual gloves, pairs, boxes and cartons. Start with the approved product in Supply SA's nitrile glove collection, then confirm the selling unit for that exact code. The active category includes Blue Nitrile Gloves and Black Nitrile Gloves listings. Product colour and material help identify a candidate, but neither establishes its suitability for a clinical or chemical task. Have the responsible person approve the precise product before converting demand into purchase quantities.

Write the unit next to every quantity

Do not accept an internal request that simply says five hundred gloves without clarifying what the requester means. Ask whether the quantity refers to individual pieces or pairs and how the supplier packages the chosen item. Record the verified pack quantity rather than assuming all nitrile products use the same box. If outer cartons contain several boxes, retain that conversion too. The purchasing schedule should show both the internal unit used by stores and the supplier's selling unit. This makes the quote understandable to finance and prevents a later buyer from repeating an incorrect conversion.

Use an example with explicit assumptions

Suppose a department has an approved requirement for one thousand individual gloves of a selected size. If the supplier confirms that the chosen box contains one hundred individual gloves, the base purchase is ten boxes. Those figures are an illustration, not a claim about the pack size of every product in the collection. If the selling unit is a carton, confirm how many boxes the carton contains before converting again. Keep any rounding to complete packs visible. An extra box created by pack rounding is stock to allocate, not an arithmetic difference to hide in the total.

Keep sizes separate in the calculation

Break the demand into the size distribution approved by the department. A total of ten boxes is incomplete if the intended mix is three small, five medium and two large boxes. Use the manufacturer's size guidance and any approved fitting process to establish those needs. Avoid treating one size as a universal substitute when a requested line is unavailable. Record acceptable alternatives through the normal specification process. If several locations share an order, retain the size-by-location allocation even when the supplier provides a combined price for the same exact product.

Separate consumption estimates from use instructions

Stores records can help estimate how many units were issued during an operating period. They should not be used to invent how long a glove can be worn, whether it can be reused or which task it is suitable for. Follow the exact product's instructions and the department's approved process for those matters. Keep exceptional demand, such as a temporary project, separate from routine replenishment. This improves the next quantity forecast without turning a historical stock movement into a technical or clinical recommendation about glove use.

Check the full commercial comparison

Ask Supply SA for the product code, size, pack quantity, unit price, VAT basis and delivery charges. Confirm any minimum order and how unavailable sizes are handled. A lower price per box may not be lower per individual piece if packaging differs. Compare the final delivered quantity on a common unit basis while keeping technical approval separate. If an alternative product is proposed, do not compare solely on cost. Obtain the relevant current documentation and approval before treating it as a like-for-like replacement in the purchasing schedule.

Reconcile receipt and replenish consistently

Count cartons, boxes and stated quantities against the confirmed conversions before marking the order complete. Update the size balances and record any approved substitute separately. Keep the packaging basis with the supplier code for the next purchase, and check it again if the product changes. The nitrile glove specification checklist can help control those model changes. The useful outcome is straightforward: a buyer can explain exactly how the department's demand became the number of selling units ordered, and stores can verify that the delivered quantity matches the approved request.

Compare ranges for your order

Use these options to refine the shortlist for the task discussed above. Follow each link to compare the listed models, available variants and selling units before confirming quantities.

Specify additional ranges for this order

Open the relevant group below to prepare a more specific enquiry. Each collection identifies listed catalogue items or clearly asks for availability confirmation when the exact item is unconfirmed.

Hand protection requests
  • If the order calls for men's leather gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for faux leather gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for apron and oven glove set, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for disposable kitchen gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for heat and cut resistant gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for latex free dishwashing gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for level 5 cut resistant gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for nappa leather gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for nitrile gloves latex free powder free, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for purple nitrile gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for high risk latex gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for arc welding gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for brown latex gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for colored latex gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for cotton medical gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for disposable finger gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for fingerless leather gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for heavy duty chemical resistant gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for kitchen cut resistant gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for latex powdered exam gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for mechanix work gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for miller welding gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for red pvc knit wrist gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for safety glasses and gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for sterile nitrile surgical gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for vinyl nitrile gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for cut resistant tactical gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for disposable gardening gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for gloves surgical rubber, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for long sleeve disposable gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for purple rubber gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for thin work gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.