Africa-wide supply enquiries · Delivery throughout South Africa

Supply SA — Your One Stop PPE Wholesaler

Supply SA buying guides

Ordering conti suit jackets and trousers in different sizes

Published 19 November 2026 · Team procurement in South Africa

A complete suit size is convenient only when both pieces fit the wearer appropriately. For some teams, separate jacket and trouser sizes make the issue schedule more accurate. Begin with the selected products in Supply SA's conti suits and separate components and confirm which models are sold as sets and which can be ordered individually. The practical objective is to preserve the approved garment combination while giving purchasing a precise component schedule. Do not assume that similar product names or a shared brand automatically establish that a jacket and trouser are an exact match.

Confirm the combination before collecting sizes

Ask the supplier to identify the compatible or intended garment pairing for the chosen model and obtain the current product details. If the workplace has a documented protective requirement, have the responsible person confirm the exact combination and its supporting information. Keep that decision separate from the size issue. Ordering separate pieces should not become an unapproved change of fabric or specification simply because another trouser is available. Record the codes and any accepted alternatives clearly, including whether colour matching or branding is part of the agreed uniform brief.

Use a chart for each component

Request the manufacturer's current jacket and trouser sizing guidance. Collect the required measurements or selections in that format and arrange fittings where appropriate. Ask employees to report the model and component tried rather than one general uniform size. A person may accept a jacket in one size and trousers in another; keep both results on the allocation record. Avoid converting an old complete-set size into two new component sizes without the relevant guidance. This is especially important when a change of model occurs at the same time as a change from set purchasing to separate pieces.

Reconcile employees, pieces and sets

Suppose fifteen people each receive two jackets and two trousers under the approved issue plan. The order needs thirty jackets and thirty trousers, broken down into the accepted sizes for each component. If five wearers need a different trouser size from their jacket size, the total still remains thirty of each component; only the size distribution changes. Show any reserve pieces separately. Do not call the result thirty suits unless the supplier actually sells and packs the selected combination that way. A precise unit description prevents the quote and receiving count from being interpreted differently.

Check replacement ordering separately

An employee may need a replacement trouser while the jacket remains suitable under the site's procedures. Ask whether the required separate component can be supplied in the same approved model and colour. Do not automatically order a full set because the previous invoice used a set description. Equally, do not assume a visually similar replacement is acceptable where the specification requires a particular combination. Keep the supervisor's approval with the request. The fabric and component comparison guide can help clarify whether a proposed replacement preserves the original garment selection or introduces a real change.

Make packing and pricing unambiguous

Send Supply SA separate lines for each code, component, size, colour and quantity. Ask for the selling unit, VAT basis, delivery charges and any branding costs to be clear. Confirm how the pieces will be packed and whether labels can follow the department allocation. If a delivery is split, identify which complete employee issues can be assembled from the first batch. A carton containing thirty garments is not necessarily fifteen complete allocations. Receiving staff need the component schedule to understand what is present and what remains outstanding before distribution begins.

Keep a useful record after fitting

Reconcile the delivery and update any accepted size exchanges. Retain the model-specific charts and pairing information so future replacements start from the combination actually approved and issued. When staff change roles or the selected model changes, review the allocation rather than copying old sizes blindly. For a full intake order, the new-starter workwear pack checklist helps coordinate the remaining garments. The result is a repeatable component system: each wearer has a documented jacket and trouser size, every piece has an exact code, and purchasing can replace what is needed without creating unnecessary or mismatched sets.

Compare ranges for your order

Use these options to refine the shortlist for the task discussed above. Follow each link to compare the listed models, available variants and selling units before confirming quantities.

Specify additional ranges for this order

Open the relevant group below to prepare a more specific enquiry. Each collection identifies listed catalogue items or clearly asks for availability confirmation when the exact item is unconfirmed.

Trousers and work suits requests
  • If the order calls for ladies' denim work overalls, specify garment contents, pocket layout, fabric and waist sizes and confirm the exact item before approving the quantity.
  • If the order calls for domestic work overalls, specify garment contents, pocket layout, fabric and waist sizes and confirm the exact item before approving the quantity.
  • If the order calls for dickies work overalls, specify garment contents, pocket layout, fabric and waist sizes and confirm the exact item before approving the quantity.
  • If the order calls for jean work overalls, specify garment contents, pocket layout, fabric and waist sizes and confirm the exact item before approving the quantity.
  • If the order calls for samson boiler suits, specify garment contents, pocket layout, fabric and waist sizes and confirm the exact item before approving the quantity.
  • If the order calls for black coveralls, specify garment contents, pocket layout, fabric and waist sizes and confirm the exact item before approving the quantity.
  • If the order calls for dickies coveralls, specify garment contents, pocket layout, fabric and waist sizes and confirm the exact item before approving the quantity.
  • If the order calls for jonsson conti suits, specify garment contents, pocket layout, fabric and waist sizes and confirm the exact item before approving the quantity.
  • If the order calls for men's mechanic work overalls, specify garment contents, pocket layout, fabric and waist sizes and confirm the exact item before approving the quantity.
  • If the order calls for red coverall, specify garment contents, pocket layout, fabric and waist sizes and confirm the exact item before approving the quantity.
  • If the order calls for 2 piece boiler suits, specify garment contents, pocket layout, fabric and waist sizes and confirm the exact item before approving the quantity.
  • If the order calls for flame retardant coveralls, specify garment contents, pocket layout, fabric and waist sizes and confirm the exact item before approving the quantity.
  • If the order calls for 3m 4515 coverall, specify garment contents, pocket layout, fabric and waist sizes and confirm the exact item before approving the quantity.
  • If the order calls for beck conti suits, specify garment contents, pocket layout, fabric and waist sizes and confirm the exact item before approving the quantity.
  • If the order calls for brown boiler suits, specify garment contents, pocket layout, fabric and waist sizes and confirm the exact item before approving the quantity.
  • If the order calls for chemical coveralls, specify garment contents, pocket layout, fabric and waist sizes and confirm the exact item before approving the quantity.
  • If the order calls for denim boiler suits, specify garment contents, pocket layout, fabric and waist sizes and confirm the exact item before approving the quantity.
  • If the order calls for dickies short sleeve coveralls, specify garment contents, pocket layout, fabric and waist sizes and confirm the exact item before approving the quantity.
  • If the order calls for full body coveralls, specify garment contents, pocket layout, fabric and waist sizes and confirm the exact item before approving the quantity.
  • If the order calls for heavy duty insulated coveralls, specify garment contents, pocket layout, fabric and waist sizes and confirm the exact item before approving the quantity.
  • If the order calls for ladies' coveralls, specify garment contents, pocket layout, fabric and waist sizes and confirm the exact item before approving the quantity.
  • If the order calls for ladies' dickies coveralls, specify garment contents, pocket layout, fabric and waist sizes and confirm the exact item before approving the quantity.
  • If the order calls for light blue coveralls, specify garment contents, pocket layout, fabric and waist sizes and confirm the exact item before approving the quantity.
  • If the order calls for men's insulated coveralls, specify garment contents, pocket layout, fabric and waist sizes and confirm the exact item before approving the quantity.
  • If the order calls for orange coveralls, specify garment contents, pocket layout, fabric and waist sizes and confirm the exact item before approving the quantity.
  • If the order calls for reflective coveralls, specify garment contents, pocket layout, fabric and waist sizes and confirm the exact item before approving the quantity.
  • If the order calls for veterinary coveralls, specify garment contents, pocket layout, fabric and waist sizes and confirm the exact item before approving the quantity.
  • If the order calls for yellow boiler suits, specify garment contents, pocket layout, fabric and waist sizes and confirm the exact item before approving the quantity.
  • If the order calls for beige boiler suits, specify garment contents, pocket layout, fabric and waist sizes and confirm the exact item before approving the quantity.
  • If the order calls for men's orange work overalls, specify garment contents, pocket layout, fabric and waist sizes and confirm the exact item before approving the quantity.
  • If the order calls for red boiler suits, specify garment contents, pocket layout, fabric and waist sizes and confirm the exact item before approving the quantity.