Africa-wide supply enquiries · Delivery throughout South Africa

Supply SA — Your One Stop PPE Wholesaler

Supply SA buying guides

Managing glove sizes and stock across a busy stores counter

Published 19 November 2026 · Team procurement in South Africa

A stores counter can run out of one glove size while still holding plenty of total stock. Reordering by the overall pair count hides that problem and can create more stock in sizes nobody needs. Start with the approved items in Supply SA's workplace safety glove range and organise the stock record by exact model, size and selling unit. The goal is reliable replenishment of an authorised selection. Stock movements should inform quantities, while product suitability, use and replacement decisions remain with the appropriate workplace process and manufacturer guidance.

Make the stock code specific

Give each model and size its own stock line, even if several look similar or come from the same brand. Record the supplier code, internal description and verified packaging unit. If purchasing is by box but issue is by pair, keep the conversion visible and confirm it for the exact product. Do not transfer a pack size from a previous model without checking. Separate stock held at a central store from quantities already issued to departments. A spreadsheet that treats both as available reserve can understate the next order and leave the counter short despite apparently healthy totals.

Record issues in useful units

Ask stores staff to capture the approved model, size, quantity and destination consistently. An anonymous entry for ten gloves is less useful than a clear record of five pairs or another verified unit. Keep exceptional issues, such as a temporary project allocation, distinguishable from normal replenishment. Avoid using issue frequency to prescribe how long a glove should be worn or whether it can be reused. Those are not purchasing decisions. The stock record simply needs to show what left the store and where it went so the next quantity request has a traceable basis.

Work through a size imbalance

Imagine a store holding twenty pairs in total: fifteen in one size, four in another and one in the size most frequently requested. A single reorder point based on twenty pairs may delay action even though the common size is almost exhausted. Review the balance and expected demand by size using the department's approved allocation process. Ask Supply SA for availability in the actual size mix required. Do not solve a shortage by issuing an unapproved size or model. If a substitute is needed, send it through the relevant fit and specification approval before adding it to the issue list.

Separate reserve stock from ordinary stock

If the business authorises a reserve for a particular project or service interruption, give it a stated owner and location. Record when it can be released and how it will be replenished. Avoid treating all unopened boxes as freely available if some belong to a committed site allocation. Confirm manufacturer storage guidance and any relevant dating information before buying unusually large quantities. The reserve should have a practical reason, not simply exist because a quoted pack size produced leftover stock that nobody allocated. Clear ownership also reduces unnecessary emergency purchases while suitable approved items are already held elsewhere.

Prepare a quote that matches the record

Send the exact product codes, sizes and selling-unit quantities, with delivery destinations and required dates. Check VAT basis, pack sizes and delivery charges together. If the supplier cannot meet one size, retain that exception rather than changing the full order to another model without approval. For disposable nitrile lines managed in the same store, use the box-to-unit quantity checklist so those packaging conventions do not become confused with paired industrial gloves. A consistent receiving schedule should allow stores to update the right size balance directly from the delivered packing list.

Use discrepancies to improve the process

Count deliveries before recording them as available and resolve wrong-size or wrong-model lines promptly. Review recurring stock discrepancies with the issuing team and correct the record rather than repeatedly adding a vague contingency quantity. The glove selection comparison remains the reference when a genuine product change is proposed. With these steps, purchasing can distinguish a technical selection question from a stock-control problem, and stores can place a repeatable order based on the exact sizes and units the approved workplace issue process actually requires.

Compare ranges for your order

Use these options to refine the shortlist for the task discussed above. Follow each link to compare the listed models, available variants and selling units before confirming quantities.

Specify additional ranges for this order

Open the relevant group below to prepare a more specific enquiry. Each collection identifies listed catalogue items or clearly asks for availability confirmation when the exact item is unconfirmed.

Hand protection requests
  • If the order calls for cut resistant gloves levels, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for nitrile exam gloves powder free, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for cut resistant gloves level 6, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for hard leather gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for ladies' black leather gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for level 4 cut resistant gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for maroon leather gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for nitrile food handling gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for powdered nitrile gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for electrical safety gloves 1000v, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for ansell nitrile gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for black nitrile food handling gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for clear disposable gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for cotton lined rubber gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for disposable cleaning gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for disposable poly gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for heat resistant rubber gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for kevlar cut resistant gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for latex free medical gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for mechanix leather gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for miller tig welding gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for polyethylene disposable gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for rubber finger gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for safety gloves purpose, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for uvex impact gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for chemical and heat resistant gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for disposable exam gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for food grade cut resistant gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for latex free household gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for nocry cut resistant gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.
  • If the order calls for stick welding gloves, specify material, coating, cuff length and size breakdown and confirm the exact item before approving the quantity.